Technical Data Sheet (TDS)
Technical Data Sheet (TDS)
GoWrap Automotive Film Systems
This document outlines the general technical specifications and performance characteristics of GoWrap Paint Protection Film (PPF) and Vinyl Wrap products.
All values represent typical testing results under controlled conditions and may vary depending on application and environment.
1️⃣ Paint Protection Film (PPF)
Product Structure
• Top Coat: Self-healing elastomeric clear layer
• Base Film: Aliphatic TPU
• Adhesive: Pressure-sensitive acrylic adhesive
• Liner: PET release liner
Technical Specifications
• Total Thickness: 180–200 microns (±5%)
• TPU Thickness: 150–165 microns
• Adhesive Thickness: 25–30 microns
• Finish Options: Gloss / Matte
Performance Characteristics
• Heat-activated self-healing
• High UV resistance
• Anti-yellowing stability
• Enhanced scratch resistance
• Controlled stretchability
• Repositionable adhesive balance
Recommended Installation Conditions
• Installation Temperature: 15°C – 30°C
• Surface must be clean and degreased
• Post-heating recommended for edges
2️⃣ Vinyl Wrap Film
Product Structure
• Film Type: Premium polymeric PVC
• Adhesive: Pressure-sensitive repositionable adhesive
• Air-Release System: Micro air-channel technology
• Liner: Silicone-coated release liner
Technical Specifications
• Total Thickness: 110–140 microns (±5%)
• Finish Options: Gloss / Matte / Satin / Metallic
Performance Characteristics
• Controlled elongation for complex curves
• Air-release bubble reduction
• UV-resistant color pigments
• Weather-resistant surface durability
• Stable adhesive tack level
Recommended Installation Conditions
• Installation Temperature: 18°C – 28°C
• Clean, dry, oil-free surface required
• Post-heating recommended for recessed areas
3️⃣ Storage Conditions (Applicable to All Products)
• Store between 15°C – 25°C
• Avoid direct sunlight
• Keep rolls upright
• Maintain original packaging
• Recommended shelf life: 12 months
4️⃣ Disclaimer
Technical specifications are provided as general guidance based on internal testing standards. Actual product performance may vary depending on installation methods, environmental exposure, and surface conditions.
Technical Data Sheet (TDS)
GoWrap Automotive Film Systems
1️⃣ Paint Protection Film (PPF)
Product Structure
| Layer | Description |
|---|---|
| Top Coat | Self-healing elastomeric clear layer |
| Base Film | Aliphatic TPU |
| Adhesive | Pressure-sensitive acrylic adhesive |
| Release Liner | PET liner |
Technical Specifications
| Property | Specification |
|---|---|
| Total Thickness | 180–200 microns (±5%) |
| TPU Layer Thickness | 150–165 microns |
| Adhesive Thickness | 25–30 microns |
| Finish Options | Gloss / Matte |
| Shelf Life | 12 Months |
| Storage Temperature | 15°C – 25°C |
Performance Characteristics
| Feature | Performance Description |
|---|---|
| Self-Healing | Heat-activated surface recovery |
| UV Resistance | High resistance to yellowing |
| Scratch Resistance | Enhanced top-coat durability |
| Stretchability | Controlled elasticity for curves |
| Adhesion | Balanced repositionable tack |
Installation Guidelines
| Condition | Requirement |
|---|---|
| Recommended Temperature | 15°C – 30°C |
| Surface Preparation | Clean, degreased, dust-free |
| Post-Heating | Recommended for edges |
2️⃣ Vinyl Wrap Film
Product Structure
| Layer | Description |
|---|---|
| Film Type | Premium polymeric PVC |
| Adhesive | Pressure-sensitive repositionable adhesive |
| Air Release | Micro air-channel system |
| Release Liner | Silicone-coated liner |
Technical Specifications
| Property | Specification |
|---|---|
| Total Thickness | 110–140 microns (±5%) |
| Finish Options | Gloss / Matte / Satin / Metallic |
| Shelf Life | 12 Months |
| Storage Temperature | 15°C – 25°C |
Performance Characteristics
| Feature | Performance Description |
|---|---|
| Stretchability | Controlled elongation |
| Air Release | Bubble reduction system |
| UV Resistance | Fade-resistant pigments |
| Weather Resistance | Outdoor durability support |
| Adhesion | Installer-friendly tack balance |
Installation Guidelines
| Condition | Requirement |
|---|---|
| Recommended Temperature | 18°C – 28°C |
| Surface Preparation | Clean and oil-free |
| Post-Heating | Recommended for edges and recess areas |
General Storage & Handling (Applicable to All Products)
| Condition | Requirement |
|---|---|
| Storage Temperature | 15°C – 25°C |
| Sunlight Exposure | Avoid direct sunlight |
| Roll Position | Store upright |
| Packaging | Keep in original packaging |
Disclaimer
All technical values are typical results obtained under controlled laboratory testing and are provided for reference purposes only. Actual performance may vary depending on installation techniques and environmental conditions.
